Sealing & Gasketing

Buna-N O-rings are resistant to oils, mild chemicals, and water.

Viton O-rings have good resistance to a wide range of chemicals and high temperatures.

Silicone O-rings are inherently food grade and resistant to high temperatures.

EPDM O-rings are ideal for outdoor use with strong resistance to water, steam, and weather.

FFKM O-rings resist harsh chemicals and extreme temperatures. Inherently softer and more compressible than PTFE.

PTFE O-rings resist harsh chemicals and extreme temperatures.

Polyurethane O-rings are resistant to oils and have excellent abrasion resistance.

Neoprene O-rings are resistant to water.

Aflas O-rings are resistant to petroleum, chemicals, and high temperatures.

Fluorosilicone O-rings are resistant to chemicals and ultra-low temperatures.

HNBR O-rings are resistant to oils, mild chemicals, and water. More heat and abrasion resistant than Buna-N.

Buna-N cord stock is resistant to oils, mild chemicals, and water.

Viton cord stock has good resistance to a wide range of chemicals and high temperatures.

Silicone cord stock is inherently food grade and resistant to high temperatures.

EPDM cord stock is ideal for outdoor use with strong resistance to water, steam, and weather.

Neoprene cord stock is resistant to water.

Aflas cord stock is resistant to petroleum, chemicals, and high temperatures.

These food grade gaskets are easy to clean, stands up to frequent sanitation, and free of nooks and crevices where bacteria could grow.

PTFE envelope enhances resistance to chemicals and high temperature while retaining the compressibility of rubber core.

Corrosion resistant stainless steel screen provides inline straining and filters particles from the processing pipeline.

Cleaned and bagged in an ISO Class 7 (10,000) clean room to remove dirt, bacteria, and surface particles.

Flange gaskets are used to create a tight seal and prevent leakage between two flange faces.

Metal construction provides structural strength to withstand higher pressures and temperatures.

Gasket tape is soft and conformable which fills irregularities on surfaces while creating a tight seal. Resistant to harsh chemicals and high temperatures.

Broad selection of gasket material provides the ability to fabricate custom gaskets.

Fiberglass offers resistance to ultra-high temperatures and chemicals. Inhibits rot and mildew.

Ceramic offers excellent resistance to both ultra-high temperatures and ultra-low temperatures.

Neoprene rubber edge trim is resistant to water.

EPDM rubber edge trim is ideal for outdoor use with strong resistance to water, steam, and weather.

SBR rubber edge trim is resistant to abrasion and wear.

Silicone rubber edge trim is resistant to high temperatures.

Silicone foam edge trim is highly compressible and resistant to high temperatures.

Braided packing that is compressed in a stuffing box to seal fluids and gases around pump shafts and valve stems.

Pre-formed, die-molded packing rings that eliminate field cutting for uniform density and a superior seal.

Also known as seal cages, lantern rings distribute flush water or lubricant evenly around the shaft in a stuffing box.

Extractors, cutters, replacement tips, and injection guns for removing, cutting, and installing compression packing.

Extra thick gaskets maintain a tight seal even as fittings wear down with extended use.

FEP shell enhances resistance to chemicals and high temperature while retaining the compressibility of rubber core.

PTFE envelope enhances resistance to chemicals and high temperature while retaining the compressibility of rubber core.

Food grade camlock gaskets with a corrosion resistant stainless steel screen. Provides inline straining and filters particles from the processing pipeline.

Metal fillers allow these food grade camlock gaskets to be picked up by metal detection systems.

Also known as lip seals, U-Cup seals are used for rod or piston sealing in linear motion applications.

Also known as Polypak seals, these U-cups are loaded with O-ring that promotes a tighter seal at low pressures.

Also known as spring-loaded seals, these U-cups are loaded with spring that promotes excellent sealing performance at low pressur. Resistant to high temperatures and chemicals.

Also known as scraper and excluder seals, these scrape dirt, dust, and moisture to prevent contamination inside the cylinder. Used for rod sealing in linear motion applications.

Also known as rotary shaft or radial seals, these retain lubricant within the cylinder while preventing entry of contaminants including dirt, dust, and moisture. Used for shaft sealing in rotary motion applications.

T-shaped elastomer seals with back-up rings provide compact, bidirectional sealing for rods and pistons.

Also known as V-rings, these axial shaft seals mount on the rotating shaft to protect bearings from contamination.

Also known as piston cups, these cup-shaped seals fit single-acting pistons in hydraulic and pneumatic cylinders.

Also known as bearing isolators, these non-contact seals protect bearings from contamination without shaft wear.

SBR is resistant to abrasion and wear.

Buna-N is resistant to oils, mild chemicals, and water.

Silicone is resistant to high temperatures.

Makes installation process easier and extends service life of the seal.