Hinge Wood Screw - Phillips Drive Flat Head - Zinc Plated Steel - 5-20 Thread - 1/2" Long - Type 17 Point
Brand
Kanebridge
Item #
AN0008
Mfr. Model #
05F08DPFD
Hinge screws, as the name suggests, are used to fasten hinges to doors and cabinets. These screws are designed to withstand greater pull out forces. The flat undercut head is similar to the standard flat head but has a shorter head, providing the screw with a longer thread than a standard flat head screw of the same length. The phillips drive has a cross-shaped indent for use with a Phillips screwdriver. Type 17 points feature a tapered point with a chip cavity. Zinc plated steel offers good corrosion resistance in applications not exposed to excessive moisture.
Specifications
| Brand Name | Kanebridge |
|---|---|
| Brand Part Number | 05F08DPFD |
| Drive Size | No. 2 |
| Drive Style | Phillips |
| Finish | Zinc Plated |
| Head Diameter | 0.234" |
| Head Diameter Tolerance | (-0.011" to +0.011") |
| Head Subtype | Undercut |
| Head Type | Flat |
| Length | 1/2" |
| Material | Steel |
| Pack Quantity | 1 |
| Point Type | Type 17 Point |
| Screw Subtype | Hinge |
| Screw Type | Wood |
| System of Measurement | Inch |
| Thread Direction | Right Hand |
| Thread Size | 5-20 |
| Thread Spacing | Fine |
| Thread Subtype | Twinfast Thread |
| Threading | Full Threaded |
Price
$0.02
/
each
