Self-Tapping Screw - Type AB - Phillips Drive Flat Undercut Head - Zinc Plated Steel - 7-19 Thread - 1/2" Long
Kanebridge
Item #
AL6809
Mfr. Model #
0708ABPU
Self-tapping screws create their own threads but require a pilot hole. The flat undercut head is similar to the standard flat head but has a shorter head, providing the screw with a longer thread than a standard flat head screw of the same length. The phillips drive has a cross-shaped indent for use with a Phillips screwdriver. Zinc plated steel offers good corrosion resistance in applications not exposed to excessive moisture.
Specifications
| Brand Name | Kanebridge |
|---|---|
| Brand Part Number | 0708ABPU |
| Countersink Angle | 82° |
| Drive Size | No. 2 |
| Drive Style | Phillips |
| Finish | Zinc Plated |
| Head Diameter | 0.275" |
| Head Diameter Tolerance | (-0.013" to +0.013") |
| Head Height | 0.059" |
| Head Height Tolerance | (-0.006" to +0.006") |
| Head Subtype | Undercut |
| Head Type | Flat |
| Length | 1/2" |
| Material | Steel |
| Pack Quantity | 1 |
| Screw Subtype | Standard |
| Screw Type | Self-Tapping |
| Specifications Met | ASME B18.6.3, SAE J933 |
| System of Measurement | Inch |
| Tapping/Drilling Screw Type | AB |
| Thread Direction | Right Hand |
| Thread Size | 7-19 |
| Threading | Fully Threaded |
$0.06
/
each
This item is temporarily unavailable.
