Self-Drilling Screw - Type BSD - Phillips Drive Flat Undercut Head - Zinc & 1,000 Hour Coated Steel - 12-14 Thread - 1" Long - #3 Drill Point

Item #
Mfr. Model # 1216KPUHC

Self-drilling screws are efficient because they eliminate the need for a pilot hole, tap their own threads, and fasten materials in a single operation. The flat undercut head is similar to the standard flat head but has a shorter head, providing the screw with a longer thread than a standard flat head screw of the same length. The phillips drive has a cross-shaped indent for use with a Phillips screwdriver. Zinc plated steel offers good corrosion resistance in applications not exposed to excessive moisture. This finish has been salt spray tested for up to 1,000 hours of corrosion resistance.

More Information
Brand Name Kanebridge
Brand Part Number 1216KPUHC
Countersink Angle 82°
Drive Size No. 3
Drive Style Phillips
Finish Zinc Plated & 1,000 Hour Coat
Head Diameter 0.396"
Head Diameter Tolerance (-0.016" to +0.016")
Head Height 0.085"
Head Height Tolerance (-0.007" to +0.007")
Head Subtype Undercut
Head Type Flat
Length 1"
Material Steel
Pack Quantity 1
Point Type #3 Drill Point
Screw Subtype Standard
Screw Type Self-Drilling
Specifications Met ASME B18.6.3, SAE J78
System of Measurement Inch
Tapping/Drilling Screw Type BSD
Thread Direction Right Hand
Thread Size 12-14
Threading Fully Threaded
$0.10 / each
Must purchase in increments of 5000
This item is temporarily unavailable.