Self-Drilling Screw - Type BSD - Phillips Drive Modified Truss Head - 18-8 Stainless Steel - 8-18 Thread - 5/8" Long - #2 Drill Point
Kanebridge
Item #
AL3041
Mfr. Model #
0810KPM188
Self-drilling screws are efficient because they eliminate the need for a pilot hole, tap their own threads, and fasten materials in a single operation. The truss head has a curved surface, extra-wide profile, and a lower profile than most pan head screws. Modified truss heads have extra flange around the outside of the head which increases the bearing force. The phillips drive has a cross-shaped indent for use with a Phillips screwdriver. 18-8 stainless steel, also commonly known as 304 or A2 stainless steel, has good chemical resistance and may be mildly magnetic.
Specifications
| Brand Name | Kanebridge |
|---|---|
| Brand Part Number | 0810KPM188 |
| Drive Size | No. 2 |
| Drive Style | Phillips |
| Finish | Plain |
| Head Diameter | 0.436" |
| Head Diameter Tolerance | (-0.010" to +0.010") |
| Head Height | 0.090" |
| Head Height Tolerance | (-0.008" to +0.008") |
| Head Subtype | Standard |
| Head Type | Truss Modified |
| Length | 5/8" |
| Material | 18-8 Stainless Steel |
| Pack Quantity | 1 |
| Point Type | #2 Drill Point |
| Screw Subtype | Standard |
| Screw Type | Self-Drilling |
| Specifications Met | SAE J78 |
| System of Measurement | Inch |
| Tapping/Drilling Screw Type | BSD |
| Thread Direction | Right Hand |
| Thread Size | 8-18 |
| Threading | Fully Threaded |
$0.15
/
each
This item is temporarily unavailable.
